Access controller SMK-AC-2

• A compact device that connects electric locks or motors to the Smart MasterKey cloud-based access control system.​

• Enables secure access via mobile app, RFID cards, PIN codes, or web links.​

• Suitable for various applications, including gates, garage doors, and electric locks.​

• Use the Smart MasterKey mobile app (available for iOS and Android) for initial setup.​

• Connect the controller to your electric lock or motor.​

• Ensure a stable internet connection for cloud synchronization.​

• Supports solenoid and motorized locks.​

• Compatible with garage doors and gate systems.​

• Mobile access via the Smart MasterKey app.​

• RFID cards or tags (supports Wiegand formats: 26, 32, 34, and 37-bit).​

• PIN codes (4-bit and 6-bit).​

• Web links for remote access.​

Assign a Smart MasterKey NFC sticker to enable tap-and-go access.​

Utilizes AES128 encryption for secure communication.​

Yes, you can set scheduled unlock periods and define times for the lock to remain open.​

• Supports Bluetooth® Low Energy and WiFi for online operation.​

• Can operate offline, ensuring functionality even without internet access.​

Yes, the SMK-AC-2 supports over-the-air firmware updates.​

• Check if the controller is properly powered and connected to the network.

• Ensure the WiFi connection is stable.

• If the controller is offline, try rebooting the device by disconnecting and reconnecting the power.

• Use the Smart MasterKey app to check the status and reconnect if needed.

• Check if the card or PIN format is correctly configured in the app or system settings.

• Ensure the RFID card or PIN is valid and properly entered.

• Verify that the device’s access control settings are configured correctly.

• Ensure that your mobile device is connected to the internet (WiFi or mobile data).

• Make sure the Smart MasterKey app is updated to the latest version.

• Check if Bluetooth® or WiFi is enabled on your mobile device for smooth synchronization.

• Ensure Bluetooth® is enabled on your phone if you’re using mobile access via Bluetooth®.

• Check if the controller is in offline mode. If so, ensure it has internet access to sync.

• Restart the mobile app and reconnect it to the controller.